Tutorials Frames Advices
Showing posts with label indoor. Show all posts
Showing posts with label indoor. Show all posts

Tuesday, February 27, 2007

General Tips on Shooting Babes in Night Club

Nightclub photography generally falls into one of two camps: moody, atmospheric shots featuring plenty of smoke and lasers or montages of drugged-up punters raving their tits off. No matter which will you choose, you need to remember some next rules:

  1. First thing is to get permissions from the management, and the band's manager. If you don't you and your camera can be busted on the hard road. And there will be no possibility to shot anything until you get yourself another camera.

  2. Taking shots in nightclubs or bars you are limited, of course, by the light available. The flash on typical Point-N-Shot camera, like Canon PowerShot or Nikon Coolpix is probably only going to be good at distances under about 10 feet. So under 10 feet and you can use the flash. So, get closer to an object you shot

  3. If you can't get so close to a scene, you need to steady the camera in the low light. A tripod would be best, but not very mobile or easy to carry on the dance floor. A monopod would be the next likely choice, but most bouncers are not to happy about you bringing in that kind of stuff.

  4. If you use SLR camera (I hope you do), use the fastest glass (lens) you can. As I used 2.0f-2.8f lenses, it's is dark enough to take good quality shots, but I think something in 1.2f-1.8f will be enough.

  5. If you don't have a spot meter, get one because, as I have discovered, exposure is very difficult. Ideally, it would be a TTL (Through The Lens) meter in the camera.


And of course, don't forget to take an emails from the babes you shot. This can be start for a good long-lasting partnership :-)

Thursday, January 11, 2007

Indoor Photo Tricks

This article was created using the article. Feel free to use original source, I just fixed a link.

Indoor Photo Tricks
There's nothing trickier for a digital camera than taking a picture inside a room with a brightly lit window. You have to feel sorry for the camera. It tries hard, to be sure; but digital cameras simply don't have the exposure latitude to properly expose the dark scene in the room and the bright view out the window at the same time. Your camera can give you only one or the other. This week, let's see what we can do about it.

Capturing the Great Outdoors
Suppose you're a real estate agent trying to capture a beautiful view through the kitchen window. You want it to be perfectly clear that there's a majestic mountain view out back. You frame the scene, putting the window in the middle of the viewfinder, and take the shot.
The mountains look great, but the room itself is so dark that it looks like midnight. What went wrong? In a nutshell, the camera's exposure meter correctly exposed the bright outdoors and consequently underexposed the room itself.

Brightening the Room
All is not lost, though. You can brighten the room in an image editor, improving the picture overall. Before you do that, you should isolate the room from the window. Why? Because if you brighten the entire scene, you'll "blow out" the window, ruining the properly exposed mountains.
If you're using Jasc's Paint Shop Pro, find and click the Freehand Selection Tool, which is in the toolbar on the left, in the fifth slot from the top. (Since it shares its cubby with the Selection and Magic Lasso, you may need to pick it from the list. Just click the drop-down arrow on the right side of the cubby and select Freehand Selection Tool.) Set the Selection type to Edge Seeker using the Tool Options palette at the top of the screen, then set the Feather control to 10 pixels.
Next, use the tool to separate the contents of the window from the rest of the image. Select the bright areas inside the window, clicking each time you have to change direction to follow the sill and curtains. You'll create a "fence" around all of the outdoors elements in the scene. Double-click to close your loop. When the window is completely enclosed, choose Selections, Invert from the menu. You've just selected everything except the window--now we can modify the scene without blowing out the mountain view.

Continued on original site.